Solar photovoltaic cables are used for transmitting electrical power generated from the solar panel to the charging units, battery banks, change over systems, inverters etc. The cables that are used to carry power from the solar panels to the charging units have to function effectively while remaining exposed to a wide range of severe environmental conditions.
| Construction | |||
| Size (Sq mm) |
Number of Strands / Diameter | Nominal Outer dia (mm) |
Max Conductor Resistance Ohms / km |
| 2.5 | 50/0.25 | 5.50 | 8.21 |
| 4.0 | 56/0.30 | 6.00 | 5.09 |
| 6.0 | 85/0.30 | 6.80 | 3.39 |
| 10.0 | 140/0.30 | 7.70 | 1.95 |
| 16.0 | 128/0.40 | 8.80 | 1.24 |
| Size(Sqmm) | Single cable in Air(Amps) |
Single cable on surface (Amps) |
Multiple Cable on Surface (Amps) |
| 2.5 | 41 | 39 | 33 |
| 4.0 | 55 | 52 | 44 |
| 6.0 | 70 | 67 | 57 |
| 10.0 | 98 | 93 | 79 |
| 16.0 | 132 | 125 | 107 |
| Voltage Grade | 600 / 1000 VAC 1000 / 1800 VDC |
| Temperature Range | -40° C to 90° C |
| Maximum Conductor Temperature | 120° C Withstands 250° C for 5 seconds |
| Standards | TUV – 2PfG 1169 / 07.2008 (Standard for Photovoltaic cables) or BSEN 50618/2014 (Covers up to 240 Sqmm) |
| Features | Resistant to Oils, Ozone, Water absorption, & severe environmental conditions Working life of more than 25 years |
Not sure where to start? Try our products
Our solution can find thermosystems products
REQUEST A CALL BACK